9.7
Fixing your telephone dialler in place
Mark the two fixing holes to be drilled in the wall using the drilling template provided.
Fix the telephone dialler in place.
Lower the aerial guide and put the screw cover logo back in place.
The telephone dialler automatically switches to normal operating mode.
Send an OFF order using a remote control or a keypad. The dialler will stop emitting BEEP's and
crackling.
If you try and take the telephone dialler off the wall, the LED indicating there is a call in progress will
light up. The telephone dialler starts its call cycle (anti-tamper protection against removal).
Your telephone dialler is ready to operate.
TT385
0
2
4
6
8
Urgence
1
3
5
7
Service
9
MIC
31
9