Testing Your Telephone Dialler - diagral TT385 Guide De Pose

TESTING YOUR TELEPHONE DIALLER

11.1 Making a test call to friends and family
Triggering a test call to a number programmed in memories 1, 2 or 3.
The test call can be used to check that your telephone dialler is properly connected to your corre-
spondents or keyholders. We advise you to systematically make a test call every time a new number
is saved.
First let your correspondent know that you are going to make a test call to their home.
Explain to them how to stop the telephone dialler's call cycle (refer to the corresponding instruc-
tions sheets).
Trigger the test call by dialling the following sequence:
memory
n° (1 to 3)
* During the long BEEP, press the "Emergency" call button on the telephone dialler for 3 seconds.
Check your correspondent received the call using the dialler loudspeaker to listen in during
the call.
11.2 Making a test call to the remote monitoring centre
The test call is used to check that your telephone dialler is properly linked with the remote monitoring
centre. We advise you to trigger this test call every time a number is programmed.
First let the remote monitoring centre know that you are going to make a test call.
Trigger the test call by dialling the following sequence:
memory
n° (1 to 3)
11
" ........ "
Long BEEP
number Emergency*
announced
LED
lights up
33
LED
lights up
11