Publicité
Les langues disponibles
Les langues disponibles
MOVEMENT AND INSTALLATION
Lifting and transporting the packaged machine
! WARNING: During all lifting operations, make sure the packaged machine is firmly secured to avoid it tipping up or being accidentally
dropped. Always load/unload lorries in adequately illuminated areas.
The machine is packaged on a wooden pallet by the Manufacturer. It must be loaded onto the transporting vehicle using suitable
equipment (see EC Directive 2006/42 and subsequent amendments and/or additions). At destination, it must be unloaded using
similar means.
A fork lift truck must always be used to lift the packaged body of the machine. Handle with care to avoid knocking or overturning
the machine.
Delivery checks
When the carrier delivers the machine, make sure the packaging and machine are both whole and undamaged. If the machine
is damaged, make sure the carrier is aware of the damage and before accepting the goods, reserve the right (in writing) to request
compensation for the damage.
Unpacking:
! WARNING: When unpacking the machine, the operator must be provided with the necessary personal protection devices (gloves,
goggles, etc.) to limit the risk of accident.
Proceed as follows to unpack the machine:
• Cut and remove the plastic straps;
• Remove the cardboard;
• Remove the bags in the battery compartment (in the detergent tank) and check the contents:
• product literature;
• battery bridges with terminals;
• 1 battery charger connector ;
• Depending on the model, remove the metal brackets or cut the plastic straps fixing the machine chassis to the pallet;
• Using a sloping ramp, push the machine backwards off the pallet;
• Unpack the brushes from their packaging.
• Clean the outside of the machine, taking care to respect safety regulations.
Once the machine is clear of the packaging, proceed to install the batteries (see the "Batteries: installation and connection"
section).
The packaging may be kept as it can be reused to protect the machine if it is moved to another site or to a repair workshop.
Otherwise it must be disposed of in compliance with current legislation.
Operations Manual
Gladiator 1280
7
Publicité
