Publicité
Les langues disponibles
Les langues disponibles
• Main brush control lever (1, fig. 5): Push this lever forwards to lower the main brush to
working position and start rotation. Raise the lever again to lift the brushes and stop rotation
on completion of work. The suction fan starts automatically when the main brush starts
rotating.
• Emergency stop button (1, fig. 6): Press this mushroom head button in the event of imminent
danger or need to deactivate all machine functions and disconnect power to the machine.
Switch off all the previously active functions (side brushes, main brush) before resetting the
emergency stop button.
• Battery charger socket (2, fig. 6): Plug the battery charger into this socket.
• Bin tipping lever (top unloading) (fig. 7): Pull this lever to rotate the bin and empty
its contents.
• Display (1, fig. 8): This displays the current battery charge level
expressed as a percentage, logos for active functions, an hour
counter showing the total hours of use of the machine and
any active alarms, see the "Display alarms " section.
• Menu button (2, fig. 8): On the Battery version, this
button is only active in the "Technical menu".
On the Dual Power version, it serves to display the hours
of functioning of the engine.
• Bin up/down switch (3, fig. 8): Lifts or lowers the debris bin.
• Speed control (4, fig. 8): Regulates the forward and reverse speed of the machine.
• Direction selector (5, fig. 8): Turn this selector to engage forward or reverse travel.
• Main switch (6, fig. 8): Switches power to all machine functions on/off.
• Horn button (7, fig. 8): Press to sound the horn.
• Light switch (8, fig. 8): Turns the lights (OPTIONAL) on and off.
• Suction switch (10, fig. 8): Switches suction on and off.
• Filter shaker button (11, fig. 8): Press and hold this button for 30 seconds to shake and
clean the suction filter. As soon as the shaker motor starts, the suction and drive motors
are switched off. You can select the "automatic filter shaker" function from the "Technical
menu". When this function is active, the filter shaker is automatically switched on at the
end of the set interval.
• Bin up/down movement enabling button (1, fig. 29): Press this button to enable bin
movement by the bin up/down switch.
10
Operations Manual
►
►
►
►
►
►
►
►
►
►
►
►
►
8
13
Gladiator 1280
pedal to lift the flaps in order to pick
up large but light objects. Release the
up large but light objects. Release the
pedal when not needed.
pedal when not needed.
►
Accelerator pedal (5, fig. 4): Press
Accelerator pedal (5, fig. 4): Press
►
this pedal to control the speed of the
this pedal to control the speed of the
machine. If the accelerator pedal is re-
machine. If the accelerator pedal is re-
leased for more than three seconds while the ma-
leased for more than three seconds while the ma-
chine is switched on, the " AUTO POWER-OFF" func-
chine is switched on, the " AUTO POWER-OFF" func-
tion switches off all machine functions. To start again,
tion switches off all machine functions. To start again,
simply press the accelerator pedal. You can enable/
simply press the accelerator pedal. You can enable/
disable and change the delay for " AUTO POWER-
disable and change the delay for " AUTO POWER-
OFF" mode from the
"Technical
OFF" mode from the
"Technical
►
Left and right side brush control lever (1, fig. 4):
►
Left and right side brush control lever (1, fig. 4):
Push this lever down to lower the side brushes to
Push this lever down to lower the side brushes to
working position and start rotation. Raise the lever to
working position and start rotation. Raise the lever to
lift the brushes and stop rotation.
lift the brushes and stop rotation.
►
Main brush control lever (1, fig. 5): Push this lever
►
Main brush control lever (1, fig. 5): Push this lever
forwards to lower the main brush to working position
forwards to lower the main brush to working position
and start rotation. Raise the lever again
and start rotation. Raise the lever again
to lift the brushes and stop rotation on
to lift the brushes and stop rotation on
completion of work. The suction fan starts
completion of work. The suction fan starts
automatically when the main brush starts
automatically when the main brush starts
rotating.
rotating.
►
Emergency stop button (1, fig. 6):
►
Emergency stop button (1, fig. 6):
Press this mushroom head button in the
Press this mushroom head button in the
event of imminent danger or need to de-
event of imminent danger or need to de-
activate all machine functions and dis-
activate all machine functions and dis-
connect power to the machine. Switch off
connect power to the machine. Switch off
all the previously active functions (side
all the previously active functions (side
brushes, main brush) before resetting the
brushes, main brush) before resetting the
emergency stop button.
emergency stop button.
Bin tipping lever (top unloading) (fig. 7): Pull this
►
Battery charger socket (2, fig. 6): Plug the battery charger into this socket. See the
►
Battery charger socket (2, fig. 6): Plug the battery charger into this socket. See the
lever to rotate the bin and empty its contents.
"Preparing the battery charger"
"Preparing the battery charger"
Display (1, fig. 8): This displays the current battery
charge level expressed as a percentage, logos for
►
Bin tipping lever (top unloading) (fig. 7): Pull this
active functions, an hour counter showing the total
lever to rotate the bin and empty its contents.
hours of use of the machine and any active alarms,
►
Display (1, fig. 8): This displays the current battery
charge level expressed as a percentage, logos for
see the
"Display alarms
" section.
active functions, an hour counter showing the total
Menu button (2, fig. 8): On the Battery version, this
hours of use of the machine and any active alarms,
see the
button is only active in the
"Technical
►
Menu button (2, fig. 8): On the Battery version, this
Dual Power version, it serves to display the hours of
button is only active in the
Dual Power version, it serves to display the hours of
functioning of the engine.
functioning of the engine.
►
Light switch (Fig. 13-Ref. 9): used to switch the
Bin up/down switch (3, fig. 8): Lifts or lowers the debris bin.
►
Bin up/down switch (3, fig. 8): Lifts or lowers the debris bin.
lights on and off (OPTIONAL)
Speed control (4, fig. 8): Regulates the forward and reverse speed of the machine.
Speed control (4, fig. 8): Regulates the forward and reverse speed of the machine.
►
►
Direction selector (5, fig. 8): Turn this selector to engage forward or reverse travel.
►
"Oil alert" light (Fig. 13-Ref.10): engine oil
Direction selector (5, fig. 8): Turn this selector to engage forward or reverse travel.
►
Main switch (6, fig. 8): Switches power to all machine functions on/off.
pressure problem.
Main switch (6, fig. 8): Switches power to all machine functions on/off.
►
Horn button (7, fig. 8): Press to sound the horn.
►
Light switch (8, fig. 8): Turns the lights (OPTIONAL) on and off.
►
Bin up/down movement enabling button (1,
Horn button (7, fig. 8): Press to sound the horn.
Engine start switch (9, fig. 8): Starts and shuts down the engine.
►
fig. 29): Press this button to enable bin move-
Light switch (8, fig. 8): Turns the lights (OPTIONAL) on and off.
►
Suction switch (10, fig. 8): Switches suction on and off.
ment by the bin up/down switch.
►
Filter shaker button (11, fig. 8): Press and hold this button for 30 seconds to shake and
Engine start switch (9, fig. 8): Starts and shuts down the engine.
clean the suction filter. As soon as the shaker motor starts, the suction and drive motors
Suction switch (10, fig. 8): Switches suction on and off.
are switched off. You can select the "automatic filter shaker" function from the
menu". When this function is active, the filter shaker is automatically
Filter shaker button (11, fig. 8): Press and hold this button for 30 seconds to shake and
switched on at the end of the set interval.
clean the suction filter. As soon as the shaker motor starts, the suction and drive motors
►
Bin up/down movement enabling button (1, fig. 29): Press this
button to enable bin movement by the bin up/down switch.
are switched off. You can select the "automatic filter shaker" function from the
menu". When this function is active, the filter shaker is automatically
switched on at the end of the set interval.
Bin up/down movement enabling button (1, fig. 29): Press this
button to enable bin movement by the bin up/down switch.
8
1
2
00:00
100%
1
2
11
10
4
4
5
5
menu".
menu".
6
6
1
1
7
section.
section.
7
"Display alarms
" section.
menu". On the
"Technical
menu". On the
29
GB
GB
1
2
3
00:00
100%
START
3
4
11
10
9
GB
3
4
START
9
8
5
5
1
1
2
2
20
20
"Technical
29
"Technical
2
1
29
2
1
2
4
5
1
0
1
5
8
7
6
21
5
0
1
7
6
Publicité
