Yamaha WaveRunner GP1300R 2003 Manuel D'atelier page 342

JET
PUMP
BEARING HOUSING
a
2. Install:
• Bearing
Driver handle—large:
YB-06071
Driver rod LS:
90890-06606
Drive shaft taper roller bearing
cup installer:
YB-06156
Bearing outer race attachment:
90890-06626
NOTE:
Support the intermediate housing with steel
blocks 1 and install the bearing using a press.
Oil seal installation
1. Install:
• Oil seal
Driver handle—large:
YB-06071
Driver rod LS:
90890-06606
Drive shaft taper roller bearing
cup installer:
YB-06156
Bearing outer race attachment:
90890-06626
NOTE:
Before installing the oil seal, lubricate the clip
groove with water-resistant grease.
Distance a:
6.8–7.2 mm (0.27–0.28 in)
2. Install:
• Intermediate drive shaft
Distance a:
9.5–10.5 mm (0.37–0.41 in)
NOTE:
Support the intermediate housing with steel
blocks 1 and install the intermediate drive
shaft using a press.
6-22
E