Adjustments - Bosch CM8S Consignes D'utilisation/De Sécurité

2610051821.qxp_BM CM8S 9/19/18 2:55 PM Page 20
▶ Depth of Cut
source before
adjustments or repairs.
▼ SETTING BLADE DEPTH FOR NORMAL
FULL-DEPTH CUTS
▼ SETTING BLADE DEPTH FOR NON-THROUGH
CUTS FOR CUTTING GROOVES

Adjustments

To avoid possible injury,
disconnect plug from power
performing any assembly,
FIG. 10
Depth
Stop Plate
For Full-Depth Cuts
FIG. 11
For Non-Through Cuts
20