Bosch CM8S Consignes D'utilisation/De Sécurité page 33

2610051821.qxp_BM CM8S 9/19/18 2:55 PM Page 33
▶ Chop Cut
▼ WHAT'S A CHOP CUT?
▼ MAKING A CHOP CUT
operation. Before switching "ON", lower head
assembly to make sure clamp clears guard and
head assembly.
Saw Operations
Use clamping position that
does not interfere with
FIG. 37
Slide Rail
Lock Knob
with the saw Off by conducting a simulated
cutting cycle, and observe the projected path of
the saw blade. Keep hands at least six (6) inches
away from the projected path of the saw blade.
33
Be aware of the path of the
saw blade. Make a dry run