Bosch CM8S Consignes D'utilisation/De Sécurité page 37

2610051821.qxp_BM CM8S 9/19/18 2:55 PM Page 37
▶ Compound Cuts
▼ FOLLOW THESE INSTRUCTIONS FOR MAKING
YOUR COMPOUND CUT:
operation. Before switching on, lower head
assembly to make sure clamp clears guard and
head assembly.
with the saw Off by conducting a simulated
cutting cycle, and observe the projected path of
the saw blade. Keep hands at least six (6) inches
away from the projected path of the saw blade.
Saw Operations
Use clamping position that
does not interfere with
Be aware of the path of the
saw blade. Make a dry run
FIG. 43
Left
Sliding
Fence
37
Bevel
Scale
Clamp
Right
Sliding
Fence
Miter Scale