Bosch CM8S Consignes D'utilisation/De Sécurité page 35

2610051821.qxp_BM CM8S 9/19/18 2:55 PM Page 35
▶ Miter Cuts
▼ WHAT'S A MITER CUT
▼ MAKING A MITER CUT
with the saw Off by conducting a simulated
cutting cycle, and observe the projected path of
the saw blade. Keep hands at least six (6) inches
away from the projected path of the saw blade.
Saw Operations
Be aware of the path of the
saw blade. Make a dry run
MITER SCALE INFORMATION
FIG. 39
"31.6" detent position
for cutting 38° "spring angle"
crown molding flat on table
▼ READING THE MITER SCALE
FIG. 40
35
1 of 10
Detent Symbols
Miter
Lock Knob