Attaching Bicycles - EUFAB Bike Lift Manuel De L'opérateur

GB

Attaching Bicycles

Attaching Bicycles

Start by lowering the holding area for the
bicycles, as described in the chapter on
"Lowering the Bicycle Carrier".
NOTE
In rare cases it might not be possible to
extend the bike carrier sufficiently as
described in step 9 so that it can to be
pushed over the ball hitch of towing
device. In this case, please tilt the bike
carrier partway down to achieve the
necessary coupling height.
WARNING
Parts on the bicycles that are not screwed
on securely can become detached during
the journey.
Injury to people or damage to property
is possible due to parts flying around.
 Remove all parts that are not securely
connected to the bicycle, e.g. air
pumps, panniers, navigation devices
or batteries.
 Also remove all parts that generate
additional resistance, e.g. such as
luggage baskets and child seats.
NOTE
To improve the handling of your vehicle, it
is best to fit the heaviest bicycle first.
Also, if you are fitting only one bicycle,
you should place the bicycle in the rail
that is closest to the rear of the vehicle.
38