Delivery Contents; Technical Specifications; Examples For Bike Lift; Coupling Requirements - EUFAB Bike Lift Manuel De L'opérateur

GB
Delivery Contents / Technical Specifications / Coupling Requirements

Delivery Contents

A = Bicycle carrier
B = 2 keys
C = 2 safety belts for front wheels
D = 1 safety belt for bicycle frames
E = Protective cover

Technical Specifications

Material:
Dead weight:
Max. load:
Power consumption,
average:
Power consumption,
maximum:
Dimensions (WxHxD),
minimum:
Dimensions (WxHxD),
maximum:
Packaging size (WxHxD):
Do not exceed the max. load of the bicycle carrier
and the permitted tongue load of the tow hitch!
The total permitted weight and permitted axle load of
the vehicle must not be exceeded with the bicycle
carrier and load.
28
Aluminium
Steel
Plastic
25 kg
60 kg
2 A
5,5 A
30 × 74 × 74 cm
135 × 74 × 74 cm
81 × 77 × 33 cm

Examples for Bike Lift

Max. tow hitch Bicycle carrier
tongue load dead weight
50 kg 25 kg
60 kg 25 kg
75 kg 25 kg
90 kg 25 kg

Coupling Requirements

DANGER
The tow hitch breaking can cause injury to
people.
The coupling may break as a result of
fitting the bicycle carrier on a coupling
in a material that is too soft.
 Fit the bicycle carrier only on a
coupling made of St52 steel, GG52
grey cast iron or better quality.
 Never fit the carrier on a coupling
made of aluminium, other light metals
or plastic.
Coupling Requirements
Fit the bicycle carrier only on tow hitches with the
following properties:
Material:.......Min. St52 steel or GG52 grey cast iron
Dvalue......................................................... ≥ 7,6 kN
Follow the instructions of the coupling manufacturer.
Max. load on the
bicycle carrier
25 kg
35 kg
50 kg
max. 60 kg !