Attaching Bicycles - EUFAB BIKE LIFT Manuel De L'opérateur

Attaching Bicycles

Start by lowering the holding area for the bicycles, as described
4
in the chapter on "Lowering the Bicycle Carrier".
NOTE
In rare cases it might not be possible to extend the
bike carrier sufficiently as described in step 9 so that
it can to be pushed over the ball hitch of towing
device. In this case, please tilt the bike carrier
partway down to achieve the necessary coupling
height.
WARNING
Parts on the bicycles that are not screwed on secu-
rely can become detached during the journey.
Injury to people or damage to property is
possible due to parts flying around.
Remove all parts that are not securely connec-
4
ted to the bicycle, e.g. air pumps, panniers,
navigation devices or batteries.
Also remove all parts that generate additional
4
resistance, e.g. such as luggage baskets and
child seats.
NOTE
To improve the handling of your vehicle, it is best to
fit the heaviest bicycle first.
Also, if you are fitting only one bicycle, you should
place the bicycle in the rail that is closest to the rear
of the vehicle.
Attaching Bicycles
35