Dosimeter Programme - VOLTCRAFT Gamma Check Pro Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12. DOSIMETER PROGRAMME

The dosimeter programme determines the radiation dose across a specific adjustable period. The radiation dose is
displayed from "00.0001 µSv", to mSv to "999 999 Sv" at most. When the maximum value is exceeded, "High" is
displayed. The duration can be set up to 99 days, 23 hours and 59 minutes at most.
When the days, hours and minutes are set to "00" (zero), a measurement for 10000 days is possible (until the
memory is full).
The conversion of impulses per time into dosage rate is based on the isotope Caesium 137. According to own
tables, the display functions "pulse count" or "pulse rate" permit conversion of the impulses for other isotopes.
Currently recorded pulses can be acoustically perceived by the ticker if the signal encoder has been activated in the
settings.
Calling the Dosimeter Settings
To call the dosimeter settings, push the Menu button (3); then use the navigation buttons "r" and "s" (2) to select
the display "
DOSIMETER
Now push the "OK" button (4) to set the dosimeter.
If no input is made for 20 seconds, the input is interrupted and the previous input appears.
Making Settings for the Measuring Time
After the "OK" button (4) is pushed, the dosimeter and day displays will start flashing and a clock symbol will appear.
Now enter the desired measuring time. The input is made in days, hours and minutes. The maximum value is
"99.23:59" and means 99 days, 23 hours and 59 minutes, i.e. just under 100 days.
When the time is set up "00.00:00", the measurement will run for 10,000 days.
Set the desired duration of the days with the navigation buttons "r" and "s" (2) and confirm it with the "OK" button
(4).
DOSIMETER
Then the hours display flashes. Set the hours with the navigation buttons "r" and "s" (2) and confirm it with the
"OK" button (4).
Then the minutes display flashes. Set the minutes with the navigation buttons "r" and "s" (2) and confirm it with
the "OK" button (4).
To get to the next menu item, push the "OK" button (4) again.
OFF".
43

Publicité

Table des Matières
loading

Table des Matières