Beurer BC 30 Mode D'emploi page 27

Display accuracy Systolic ± 3 mmHg, diastolic
± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard devia-
inaccuracy tion according to clinical testing:
systolic 8 mmHg / diastolic
8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 70 mm x W 72 mm x
H 27.5 mm
Weight Approximately 105 g (without
batteries, with cuff)
Cuff size 135 to 195 mm
Permissible operat- +10 °C to +40 °C, 30-85 % relative
ing conditions humidity (non-condensing)
Permissible storage -20 °C to +60 °C, 10-95 % relative
conditions humidity, 700-1050 hPa ambient
pressure
Power supply 2 x 1.5 V
Battery life For approx. 300 measurements,
depending on levels of blood
pressure and pump pressure
AAA batteries
27
Classification Internal supply, IPX0, no AP or
APG, continuous operation, ap-
plication part type BF
The serial number is located on the device or in the bat-
tery compartment.
Technical information is subject to change without notifi-
cation to allow for updates.
• This unit is in line with European Standard EN 60601-1-
2 and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this unit. More details can be requested
from the stated Customer Services address or found
at the end of the instructions for use.
• This device is in line with the EU Medical Devices Di-
rective 93/42/EEC, the "Medizinproduktegesetz" (Ger-
man Medical Devices Act) and the standards EN 1060-
1 (non-invasive sphygmomanometers, Part 1: General
requirements), EN 1060-3 (non-invasive sphygmoma-
nometers, Part3: Supplementary requirements for elec-
tro-mechanical blood pressure measuring systems)
and IEC 80601-2-30 (Medical electrical equipment –
Part 2-30: Particular requirements for the safety and