Remedy - Beurer BC 87 Mode D'emploi

9. REMEDY

Error Possible cause
mes-
sage
Unable to record a
pulse.
You moved or spoke
during the measure-
ment.
The cuff is not at-
tached correctly.
An error occurred
during the measure-
ment.
Solution
Please wait one
minute and repeat the
measure ment.
Ensure that you do not
speak or move during
the measurement.
Please observe the
information in chapter
"Attaching the cuff" and
take another measure-
ment after one minute.
Please wait one
minute and repeat the
measure ment.
Ensure that you do not
speak or move during
the measurement.
If the error occurs
repeatedly, consult a
doctor to check you are
healthy.
Error Possible cause
mes-
sage
The inflation pres-
sure is higher than
300 mmHg.
The measured values
are outside the
specified measure-
ment range.
The batteries are
almost empty.
Unable to transfer the
data via Bluetooth
A device error has
occurred.
If the problem still occurs despite the suggested corrective
actions, please contact Customer Services.
36
Solution
Please take another
measurement to check
whether the cuff can be
correctly inflated.
Insert new batteries into
the device.
Please observe the in-
® . formation in the section
"Transfer of measure-
®
ments via Bluetooth
Please wait one minute
and repeat the meas-
urement.
".