Beurer BC 87 Mode D'emploi page 28

Hour format
The hour format flashes on the display.
• Select the desired hour format using the
M1 or M2 memory button and confirm with
the START/STOP button
Date
The year flashes on the display.
• Select the desired year using the M1 or
M2 memory button and confirm with the
START/STOP button
The month flashes on the display.
• Select the desired month using the M1 or M2
memory button and confirm with the START/
STOP button .
The day flashes on the display.
• Select the desired day using the memory but-
ton M1 or M2 and confirm with the START/
STOP button .
If the hour format is set as
sequence is reversed.
Time
The hours flash on the display.
• Select the desired hour using the M1 or M2
memory button and confirm with the START/
STOP button .
.
.
, the day/month display
The minutes flash on the display.
• Select the desired minute using the M1 or M2
memory button and confirm with the START/
STOP button .
®
Bluetooth
The Bluetooth ® symbol is shown on the display.
• Use the M1 or M2 memory button to select whether
automatic Bluetooth
(Bluetooth ® symbol is shown) or deactivated (Bluetooth
symbol is not shown) and confirm with the START/STOP
button .
• If automatic data transfer via Bluetooth
tivated, data transfer is started automatically after the
measurement.
® transfers will reduce the battery life.
Bluetooth
User
The user symbol flashes in the display.
• Use the M1 or M2 memory button to select the
desired user.
• Confirm your selection with the START/STOP button
• The device then switches off automatically.
28
® data transfer should be activated
®
has been ac-
®
.