Additional Operating Instructions - Inogen One G2 Manuel D'utilisation

7. Set the Inogen One® G2 Concentrator to the flow rate prescribed by your physician or
clinician.
Use the + or – setting buttons to adjust the Inogen One® G2 to the desired setting.
The current setting can be viewed on the display.
8. Position the nasal cannula on your face and breathe through your nose.
The Inogen One® G2 will sense the onset of inhalation and deliver
a burst of oxygen at a precise time when you inhale. The Inogen
One® G2 will sense each breath and continue to deliver oxygen
in this manner. As your breathing rate changes, the Inogen One®
G2 will sense these changes and deliver oxygen only as you need
it. At times, if you inhale very quickly between breaths the Inogen
One® G2 may ignore one of the breaths, giving the appearance of a
missed breath. This may be normal as the Inogen One® G2 senses
and monitors the changes in your breathing pattern. The Inogen
One® G2 will normally sense the next breath and deliver oxygen
accordingly.
A green light will flash each time a breath is detected. Make certain that the nasal cannula
is properly aligned on your face and you are breathing through your nose.
wArNING If you begin to feel ill or are experiencing discomfort while using this
! C
device, consult your physician immediately.
CAUTION The Inogen One® G2 is designed to provide a flow of high purity oxygen.
An advisory alarm, "Oxygen Low", will inform you if oxygen concentration
drops. If alarm persists, contact your equipment provider.
General
To remove power, unplug the input cord from its source (i.e., AC wall outlet, car cigarette
lighter adapter).
CAUTION Ensure the Universal Power Supply is powered from only one power source
(AC or DC) at any given time. The Universal Power Supply may not operate
properly if simultaneously powered using both AC and DC sources.
14

Additional Operating Instructions

For Use In Home with AC Power
For operation of the Power Supply using an AC power source, follow these instructions:
1. Connect the AC Input to the power supply.
2. Connect the AC Power Plug to the power source and connect the Power Output
Plug to the Inogen One® G2. The green LED will be illuminated, indicating the
Universal Power Supply has input power.
Traveling with your Inogen One® G2 System
The Inogen One® G2 System makes travel by plane, boat, car or train more convenient
for oxygen users than ever before. Now you get the same quality performance and
convenience while on the go that you're used to receiving from your Inogen One® G2 at
home. Here are some useful and important instructions for maximizing performance
and convenience when using your Inogen One® G2 while traveling.
You should begin planning for a trip with a checklist of items to remember. This checklist
should include:
✓Universal Power Supply
✓ Extra Battery(s) if required
✓Important phone numbers, such as those of your physician and home healthcare
provider, or providers in the area you will be traveling
✓ Plan for backup oxygen in the event of a prolonged power outage or mechanical failure.
For Use In Automobile/rV/Boat
For operation of the Universal Power Supply using a DC power
source, follow these instructions:
1. Connect the DC Input to the power supply.
2. Connect the DC Power Plug (Cigarette Lighter Adapter) to
the power source and connect the Power Output Plug to the
Inogen One® G2. The green LED will be illuminated, indicating
the power supply has input power.
15
Operating Instructions Chapter 3