Table des Matières

Publicité

R&S ETC
2.1.9

GEN OUT

See (5) in
Fig.
2-1.
Both models, 2116.5000.04 and 2116.5000.08, have a tracking generator
(R&S ETC-K10 option required) and the corresponding output connector.
The nominal output level can be reduced in 1 dB steps.
Risk of instrument damage
The reverse voltage up to the voltage stated on the R&S ETC housing must not
be exceeded.
2.1.10

ACCESSORIES

See (8) in
Fig.
2-1.
Specially configured for accessories used for the following activities:
● Supplying power
● Controlling accessories
● Transferring data
● Controlling power sensors (R&S FSH-Z1/Z18/Z14/Z44)
For further information see chapter 3.3.2.
Getting Started 2116.7884.02 - 04.00
Interfaces and Connectors
18

Publicité

Table des Matières
loading

Table des Matières