Putting Up The Instrument; Placing The Instrument On A Bench Top - R&S ETC Guide Rapide

R&S ETC
1.2

Putting Up the Instrument

The R&S ETC compact TV analyzer is designed for interior use only.
Risk of instrument damage
Make sure that the following conditions are met at the operation site:
● The ambient temperature does not exceed the range specified in the data
sheet.
● All fan openings are unobstructed and the airflow perforations are unimpeded.
The minimum distance from the wall is at least 10 cm.
Failure to meet these conditions may cause damage to the R&S ETC or other
devices in the test setup.
If necessary, use proper protective equipment to protect DUTs against
electrostatic discharge in the event of human contact.
1.2.1

Placing the Instrument on a Bench Top

The R&S ETC is designed for use under general laboratory conditions.
Risk of injuries
If the R&S ETC is not set up securely, you or others can be injured.
Place the R&S ETC on a stable and level surface. Do not place anything on top of
the R&S ETC, if the R&S ETC is not in a level position.
Before folding out the feet at the R&S ETC bottom, read the safety instructions for
instruments with fold-out feet at the beginning of this manual carefully.
Getting Started 2116.7884.02 - 04.00
Setting Up the Instrument
11