Maintenance; Recommended Maintenance Schedule; Maintenance Procedure - Toro 22602 Manuel D'installation

Maintenance

Recommended Maintenance Schedule

Maintenance
Service Interval
Before each use or daily
After the first 20 hours
Every 50 hours
Every 100 hours
Every 300 hours
Yearly or before
storage
(1) More frequently in dusty conditions
Important: Refer to your Engine Operator's Manual for additional maintenance
procedures.
19

Maintenance Procedure

• Check the engine oil level.
• Lubricate the cutting blade bearings. (Lubricate immediately after every
washing.)
• Check the air filter
• Check the safety bail switch
• Check the cutter blades for sharpness and missing or bent teeth
• Inspect the drive belt for wear and tension
• Remove debris from the unit
• Check for loose fasteners
• Check/replace safety and instructional decals
• Change the engine oil
• Check/Replace the air filter (1)
• Inspect the drive belt for wear or damage
• Change the engine oil (1)
• Clean the sediment cup
• Check/adjust the spark plug
• Replace the air filter paper element
• Replace the spark plugs
• Replace the drive belt
• Change the engine oil
• Check/Replace the air filter
• Clean the sediment cup
• Check/adjust the spark plug
• Touch up chipped paint