Controls; Throttle; Safety Bail; Parking Brake - Toro 22602 Manuel D'installation

Controls

Throttle:

The throttle lever controls engine speed.
With the lever down, in the DISENGAGED position the
engine runs at idle. This is also the starting position.
When the engine speed increases, to the ENGAGED
position, the centrifugal clutch engages and the cutting
blade rotates.

Safety Bail:

Hold the safety bail against the handle to deactivate the
engine kill switch so the engine will start. Releasing the
bail stops the engine.

Parking Brake:

The parking brake holds the left wheel from turning to
secure the machine and for easy movement of the
machine from side to side when grinding the stump.

Hour Meter:

The hour meter shows the hours the unit has been used
and runs only when the engine is running.
9