Cleaning The Sediment Cup - Toro 22602 Manuel D'installation

Cleaning the Sediment Cup

Underneath the fuel valve is a sediment cup to catch dirt in the fuel.
1. Move the fuel valve to the OFF position, all the
way to the left.
2. Unscrew the sediment cup (2). Make sure not to
misplace the o-ring (1).
3. Clean the reservoir and the o-ring using a
cleaning solvent and dry carefully.
4. Put the o-ring in place in its groove and replace
the sediment cup (2).
Note: Make sure not to misplace the o-ring (1).
5. Turn the fuel valve to the ON position, all the
way to the right, and check for leaks. If it leaks,
replace the o-ring.
24