Toro 22602 Manuel D'installation page 3

The Stump Grinder is used to remove tree stumps. By moving the machine in sweeping
movements laterally over the top and front of the stump, the blade gradually grinds it away.
Only use the machine for removing tree stumps and exposed root systems. It is not intended for
any other use. Read this information carefully to learn how to operate and maintain your product
properly and to avoid injury and product damage. You are responsible for operating the product
properly and safely.
You may contact Toro directly at www.Toro.com for product and accessory information, help
finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional information, contact an
Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of
your product ready. Figure 1 identifies the location of the model and serial numbers on the
product. Write the numbers in the space provided.
1
Figure 1
1. Model and serial number location
Model No. ____________________________________________
Serial No. ____________________________________________
This manual identifies potential hazards and has safety messages identified by the safety alert
symbol (Figure 2), which signals a hazard that may cause serious injury or death if you do not
follow the recommended precautions.
Figure 2
1. Safety alert symbol
2