Maintenance; Replacing The Scraper Blade; Preparing The Battery Pack For Recycling; Service - Toro Power Shovel Manuel De L'utilisateur

Masquer les pouces Voir aussi pour Power Shovel:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance

DANGER
Contact with the rotor can cause serious
personal injury.
• Remove the battery pack before adjusting
or maintaining the machine.
• Always wear gloves when adjusting or
maintaining the machine.
Replacing the Scraper
Blade
Service Interval: Every 20 hours
Remove the 4 screws securing the scraper blade and
replace the scraper blade as necessary.
Figure 13
1. Screw
g316736
2. Scraper blade
Preparing the Battery Pack
for Recycling
Important:
Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Lithium-ion battery packs labeled with the
Call2Recycle seal can be recycled at any
participating retailer or battery recycling
facility in the Call2Recycle program (US
and Canada only). To locate a participating
retailer or facility closest to you, please call
1-800-822-8837 or visit www.call2recycle.org.
If you cannot locate a participating retailer or
facility nearby, or if your rechargeable battery
is not labeled with the Call2Recycle seal,
please contact your local municipality for more
information on how to responsibly recycle the
battery. If you are located outside of the US
and Canada, please contact your authorized
Toro distributor.

Service

Should the machine need service, take it to your
Authorized Service Dealer.
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3990939909t

Table des Matières