Scope Of Delivery; Technical Design - SATA SATAjet 1800 M Mode D'emploi

Operating Instructions SATAjet 1800 M

6. Scope of Delivery

■ Automatic gun with selected modules, depending on variant and ver-
sion
■ Tool kit
■ Operating Instructions

7. Technical Design

7.1. Spray module with Rear-Connection control module and
external round / flat fan control
Closing screw
[1-1]
Spray module
[1-2]
Inspection hole
[1-3]
[1-4] Nozzle head (aluminium or
stainless steel)
7.2. Spray module with Underside-Connection control mod-
ule
and external round / flat fan control
[2-12] Closing screw
[2-13] Spray module
[2-14] Inspection hole
[2-15] Fastening thread M5
[2-16] Nozzle head (aluminium or
stainless steel)
7.3. Tool kit
[3-4] Extraction tool
[3-5] Cleaning brush
7.4. Underside-Connection control module and external
round / flat fan control
[4-14] Seal seat with moulded seal
[4-15] Fastening hole M5
[4-16] Fastening hole M8
[4-17] Fastening hole M5
[4-18] Control air connection
[4-19] Compressed air connection,
round fan
[4-20] Handwheel
Control module
[1-5]
Air cap
[1-6]
Air cap ring
[1-7]
[1-8] Handwheel
[2-17] Fastening thread M8
[2-18] Fastening thread M5
[2-19] Control module
[2-20] Air cap
[2-21] Air cap ring
[2-22] Handwheel
[3-6] Universal spanner
[4-21] Material return flow
connection (sealed in
factory)
[4-22] Control module
[4-23] Material flow connection
[4-24] Fastening hole M8
[4-25] Compressed air connection,
flat fan
[4-26] Fastening hole M8
EN
31