Operating Instructions SATAjet 1800 M
EN
■ Processing acidic or alkaline materials is prohibited.
■ The processing of solvents with halogenated hydrocarbons, petrol, ker-
osene, herbicides, pesticides and radioactive substances is prohibited.
Halogenated solvents can result in explosive and corrosive chemical
compounds.
Operating parameters
■ The automatic gun may only be operated within the parameters stated
on the unit and in the operating instructions.
Connected components
■ The connected components must reliably withstand the thermal, chemi-
cal and mechanical loads expected when using the automatic gun.
■ When pressurised hoses work loose, their whip-like movements and
any material that is squirted out can cause injuries. Always vent the
hoses completely before they are loosened.
General
■ Comply with the local regulations for safety, accident prevention, occu-
pational health and safety and environmental protection.
3. Intended Use
Intended Use
The automatic gun is used to apply paints, lacquers and other sprayable
media on suitable substrates.
Unintended use
Inappropriate use includes using the automatic gun in conjunction with
food products or for spraying unsuitable materials, such as acids or caus-
tic solutions.
4. Description
The automatic gun is activated by a pneumatic control pulse. The control
pulse opens the control piston and thus the paint needle. The control
pulse has no impact on the spraying air. The gun is designed for contin-
uous operation. The spraying air control (pre- / post air control) must be
adjusted if necessary by means of an upstream control valve.
5. Versions
The SATAjet 1800 M is a modular system that can be put together individ-
ually for the specific application. The automatic gun consists of the follow-
ing modules:
■ Spray module with nozzle set
■ Control module
30