10
AMX Switch Series Installer/User Guide
Needed for installation
You will need the following components to install the AMX switch:
•
UTP cables for each server and user station you plan to attach to the AMX switching system
•
One AMX5100, AMX5110 or AMX5120 user station per user
•
One AMIQ module per server or one AMIQ-SRL module per serial device
Optionally you may need:
•
AMWorks software available on the included CD and through download from Avocent
Installing an AMX Switching System
Figure 2.1 illustrates one possible configuration for your AMX switch. Follow the detailed set
of procedures following Figure 2.1 to install the AMX switching system.
AMX5110/5120
User Station
Figure 2.1: Basic AMX Switching System Configuration
AMX5000 Switch
AMIQ
Module
Local PC
AMIQ-SRL
Module