Figure 4.7: Oscar Interface Information: Mdm Server - Avocent AMX Série Guide D'installation Et D'utilisation

NOTE: The devices displayed on the Device Admin screen depend on the assigned user rights. It is only
possible to edit devices that are attached to the AMX switching system and powered. Only users logged in as the
system administrator may edit all devices except Matrix System.
3. From the drop-down list, select the device you wish to edit.
4. Click the Edit Device button. The Edit Device screen displays.
5. Type a new name (1-15 characters) for the device in the Name field.
6. From the Target drop-down list, select the cascaded Avocent KVM switch to which the AMIQ
module is attached.
- or -
Select KVM Switch if the cascaded switch is a non-Avocent switch.
7. Select the number of ports on the cascaded KVM switch from the Ports drop-down list.
8. Select the hotkey sequence of the cascaded KVM switch from the Hotkey drop-down list.
9. Click Apply to apply and save changes. The AMIQ module briefly disappears from the list,
then reappears with the MDM servers that represent each port on the cascaded switch.
10. Repeat steps 3-5 to rename each MDM server. Click Apply for each MDM server on the list.
11. (Optional) Edit additional MDM AMIQ modules by repeating steps 3-10.
To view MDM server information:
1. Press to launch the OSCAR interface.
Ctrl+Ctrl
2. Click the Admin tab. The Device Admin screen displays.
3. Select the MDM server for which you wish to view version, configuration and
connection information.
4. Click the Edit Device button.The Edit Device screen displays.
5. Click the Info button. The Information screen displays.

Figure 4.7: OSCAR Interface Information: MDM Server

6. Click Close to return to the Device Admin screen.
Chapter 4: Advanced Operations 37