Figure 3.6: Oscar Interface Server Hotkey - Avocent AMX Série Guide D'installation Et D'utilisation

Esc
NOTE: Pressing the
13. Click Apply to apply and save all changes to the target flag.
14. Click Cancel to exit the Target Flag screen.
To set or change a server hotkey:
1. Press to launch the OSCAR interface.
Ctrl+Ctrl
2. When the OSCAR interface dialog box appears, click the User tab. The User screen displays.
3. Click the down arrow button twice or

Figure 3.6: OSCAR Interface Server Hotkey

4. Type the name of the server for which you wish to change the associated hotkey. A list of
servers displays.
NOTE: Clicking the Name button sorts the list of servers by name; clicking the Hotkey button sorts the list
of hotkeys. A star will display next to the Name or the Hotkey button. Clicking the Clear All button clears all
hotkey assignments to this point.
5. Click the server you wish to change.
6. Click the Change button. The Change Hotkey screen displays.
key enables you to return to the Target Flag screen without saving the new position.
Ctrl + page end
Chapter 3: Basic Operations
to display the Server Hotkey screen.
25