Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
22
AMX Switch Series Installer/User Guide
Maintain
Use Maintain mode when you wish to remain connected to a server while rebooting. Once selected
in Maintain mode, the server will not lose contact with the switch when power to the server
is cycled.
NOTE: Servers in Maintain mode cannot be shared.
User
The User tab enables you to control your system at the local port. The User tab screens enable you
to change your password and the scan dwell time. Other operations enabled through the User tab
include setting the target flag layout and selecting hotkey functions.
NOTE: Using an LDAP password disables the option to change the password.
When the AMX user station is powered, you are prompted for your password. Passwords must be
at least six characters long.
NOTE: All ASCII characters can be used in the login prompt. The characters (' ^ ~) must be typed twice before
they display in the password field.
For more information on passwords and user options, see User Maintenance in Chapter 4. Once
you have entered your login name and password, the OSCAR interface is displayed. You can
change your password at any time.
If you have not logged in successfully, the OSD displays the Matrix System label and the names of
locally connected computers in the server list. Double-clicking Matrix System switches you to the
login dialog box.
To access the OSCAR interface:
Launch the OSCAR interface by pressing the left or right
sequences, see the Console Maintenance section in Chapter 4. Throughout this manual,
used as the default hotkey sequence.
To change your user password and scan dwell time:
NOTE: If the lockdown mode is on, none of the fields in this screen will be active, with the exception of the log
out button.
1.
Press
Ctrl+Ctrl
2.
When the OSCAR interface dialog box appears, click the User tab.
to launch the OSCAR interface.
key twice. For alternative hotkey
Ctrl
is
Ctrl+Ctrl
Publicité
Chapitres
Table des Matières
