Console; Figure 3.7: Oscar Interface Change Hotkey - Avocent AMX Série Guide D'installation Et D'utilisation

26 AMX Switch Series Installer/User Guide

Figure 3.7: OSCAR Interface Change Hotkey

7. Click the down arrow button and select the desired hotkey from the drop-down list. Click OK.
NOTE: If the selected hotkey is already assigned to a different server, you can re-assign the selected hotkey or
return to the Change Hotkey screen to select another hotkey.
NOTE: The Clear button enables you to clear the selected hotkey assignment.

Console

The Console tab is used to set local settings for the AMX user station including country specific
keyboard layout, keyboard type, OSD hotkey sequence, Command Line hotkey sequence, quick switch
hotkey sequence and inactivity time. For the AMX5120 user station and above, the Console tab
enables the selection of keyboard type.
Selecting the logout option and clicking Apply will configure your AMX user station to
automatically log a user out after a specified amount of keyboard and mouse inactivity.
You may choose to select an alternative OSD hotkey sequence by selecting one of the options listed
in the drop-down menu. You can use the default,
then access the OSCAR interface by pressing either the left or right
OSD hotkey sequences are:
All
Print Screen
Ctrl+Ctrl (L-R)
Ctrl+Ctrl (L)
Ctrl+Ctrl (R)
Alt+Alt (L-R)
, as the OSD hotkey sequence and
Ctrl+Ctrl (L-R)
Ctrl
key twice. The available