Table 3.1: Oscar Interface Status Symbols; Selecting Servers - Avocent AutoView 2000 Guide D'installation Et D'utilisation

14 AutoView 2000 Installer/User Guide
NOTE: You can also press the Control key twice within one second to launch the OSCAR interface. You can
use this key sequence in any place you see Print Screen throughout this installer/user guide.
Viewing the status of your switch
The status of the servers in your system is indicated in the right columns of the Main dialog box.
The following table describes the status symbols.

Table 3.1: OSCAR Interface Status Symbols

Symbol Description
AVRIQ module is online (green circle).
AVRIQ module is offline or is not operating properly.
Server is cascaded through a cascade legacy switch. The switch is online and has power.
Server is cascaded through a cascade legacy switch. The switch is offline or has no power.
AVRIQ module is being upgraded (yellow circle).
AVRIQ module is being accessed by the indicated user channel (green channel letter).
AVRIQ module is blocked by the indicated user channel (black channel letter).

Selecting servers

Use the Main dialog box to select servers. When you select a server, the appliance reconfigures the
keyboard and mouse to the proper settings for that server.
To select servers:
Double-click the server name, EID or port number.
-or-
If the display order of your server list is by port (Port button is depressed), type the port number
and press
Enter
-or-
If the display order of your server list is by name or EID number (Name or EID button is
depressed), type the first few characters of the name of the server or the EID number to establish it
as unique and press
.
.
Enter