Assigning Server Names; Figure 3.3: Names Dialog Box - Avocent AutoView 2000 Guide D'installation Et D'utilisation

18 AutoView 2000 Installer/User Guide

Assigning server names

Use the Names dialog box to identify individual servers by name rather than by port number. The
Names list is always sorted by port order. Names are stored in the AVRIQ module, so even if you
move the cable/server to another ARI port, the name and configuration will be recognized by
the switch.
NOTE: If a server is turned off, its respective AVRIQ module will not appear in the Names list.
To access the Names dialog box:
1. Press
Print Screen
2. Click Setup

Figure 3.3: Names Dialog Box

NOTE: If the server list changes, the mouse cursor will turn into an hourglass as the list is automatically updated. No
mouse or keyboard input will be accepted until the list update is complete.
To assign names to servers:
1. In the Names dialog box, select a server name or port number and click Modify. The Name
Modify dialog box displays.
to launch the OSCAR interface. The Main dialog box will appear.
Names The Names dialog box displays.
- .