Assigning Server Names; Figure 3.2: Setup Dialog Box; Figure 3.3: Names Dialog Box - Avocent AutoView 1400 Guide D'installation Et D'utilisation

20 AutoView 1400/1500/2000 Installer/User Guide

Figure 3.2: Setup Dialog Box

Assigning server names

Use the Names dialog box to identify individual servers by name rather than by port number. The
Names list is always sorted by port order. Names are stored in the AVRIQ or IAC module, so even
if you move the module/cable to another ARI port, the name and configuration will be recognized
by the switch.
NOTE: If a server is turned off, its respective AVRIQ or IAC module will not appear in the Names list.
To access the Names dialog box:
1. Press
Print Screen
2. Click Setup

Figure 3.3: Names Dialog Box

NOTE: If the server list changes, the mouse cursor will turn into an hourglass as the list is automatically updated. No
mouse or keyboard input will be accepted until the list update is complete.
to launch the OSCAR interface. The Main dialog box will appear.
Names The Names dialog box displays.
- .