Navigating The Oscar Interface; Table 3.2: Oscar Interface Navigation Basics - Avocent AutoView 1400 Guide D'installation Et D'utilisation

To select the previous server:
Press
Print Screen
and current connections.
To disconnect the user from a server:
Press
Print Screen
status flag on your desktop displays Free.
Soft switching
Soft switching is the ability to switch servers using a hotkey sequence. You can soft switch to a server by
pressing
Print Screen
Screen Delay Time and you press the key sequences before that time has elapsed, the OSCAR interface
will not display.
To configure servers for soft switching:
1. Press
Print Screen
2. Click Setup - Menu. The Menu dialog box displays.
3. For Screen Delay Time, type the number of seconds of delay desired before the Main dialog
box is displayed after
4. Click OK.
To soft switch to a server:
1. To select a server, press
button is depressed), type the port number and press
-or-
If the display order of your server list is by name or EID number (Name or EID button is
depressed), type the first few characters of the name of the server or the EID number to
establish it as unique and press
2. To switch back to the previous server, press

Navigating the OSCAR Interface

This table describes how to navigate the OSCAR interface using the keyboard and mouse.

Table 3.2: OSCAR Interface Navigation Basics

This Keystroke
Print Screen,Ctrl-Ctrl
Shift-Shift, and/or
Alt-Alt
Print Screen-Print
Screen
and then . This key combination toggles you between the previous
Backspace
and then . This leaves the user in a free state, with no server selected. The
Alt+0
and then typing the first few characters of its name or number. If you have set a
to launch the OSCAR interface. The Main dialog box displays.
is pressed.
Print Screen
. If the display order of your server list is by port (Port
Print Screen
.
Enter
Does This
Activates the OSCAR interface. See Changing the display behavior later in this
chapter for further details.
Press Print Screen twice to send the Print Screen keystroke to the currently
selected device.
Chapter 3: Basic Operations
.
Enter
then
Print Screen Backspace
17
.