Figure 2.2: Basic Autoview Switch Configuration - Avocent AutoView 1400 Guide D'installation Et D'utilisation

CAUTION: To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit.
Configuration Port
(for updating firmware)

Figure 2.2: Basic AutoView Switch Configuration

NOTE: Only the AutoView 1500 and the AutoView 2000 switches support two simultaneous users.
Analog User B
Analog User A
AVRIQ Module
Server 1
Chapter 2: Installation
AutoView Switch
Servers 3-16
IAC Module
Server 2
7