Setting The Keyboard Country Code; Figure 3.8: Keyboard Box - Avocent AutoView 1400 Guide D'installation Et D'utilisation

24 AutoView 1400/1500/2000 Installer/User Guide
Setting a Screen Delay Time allows you to complete a soft switch without the OSCAR interface
displaying. To perform a soft switch, see Soft switching in this chapter.

Setting the keyboard country code

The AutoView 1400/1500/2000 switch can be configured to recognize a variety of keyboards. The
default setting is for a US keyboard. If you wish to change this configuration, the Keyboard dialog
box allows you to select a different keyboard country code.
NOTE: Ensure that the country code selected on your Sun server matches the Keyboard Country Code selected
in the OSCAR or your keyboard will not be mapped correctly.

Figure 3.8: Keyboard Box

To change the keyboard country code:
1. Press
Print Screen
2. Click Setup-Keyboard. The Keyboard dialog box displays.
3. Select your desired keyboard country code and click OK.
4. A Keyboard Warning dialog box will appear to confirm your changes.
to launch the OSCAR interface. The Main dialog box will appear.