Managing Server Tasks Using The Oscar Interface; Figure 3.15: Oscar Interface Virtual Media Dialog Box; Table 3.7: Commands To Manage Routine Tasks For Your Target Devices - Avocent DSR2035 Guide D'installation Et D'utilisation

42
DSR2035/8035 Switch Installer/User Guide

Figure 3.15: OSCAR Interface Virtual Media Dialog Box

3. Click to enable or disable each of the options. For information about individual settings, see
Table 3.6 on page 41.
4. Click OK to accept the options you have selected and return to the Setup dialog box.

Managing server tasks using the OSCAR interface

From the OSCAR interface Commands dialog box, you can manage your DSR2035/8035
switching system and user connections, enable the Scan and Broadcast modes and update
your firmware.

Table 3.7: Commands to Manage Routine Tasks for Your Target Devices

Feature
Broadcast
Enable
Scan Enable
User Status
Display
Versions
Reset PS/2
Purpose
Begin broadcasting to your target devices. Configure a target device list for broadcasting under
the Setup dialog box.
Begin scanning your target devices. Set up a target device list for scanning in the Setup dialog
box.
View and disconnect users.
View version information for the DSR2035/8035 switch as well as view and upgrade firmware
for individual DSRIQ modules.
Re-establish operation of PS/2 keyboard and mouse.