Avocent DSR2035 Guide D'installation Et D'utilisation page 94

82
DSR2035/8035 Switch Installer/User Guide
8. Enter the name of the file that you downloaded from the Avocent web site.
9. Confirm the TFTP download by typing a
10. The DSR2035/8035 switch will begin the FLASH upgrade process. On-screen indicators will
display the upgrade progress. When the upload is complete, the DSR2035/8035 switch will
reset and upgrade the internal subsystems.
11. Once the upgrade is complete, the login screen will appear.
NOTE: If the green LED on the back panel of the switch blinks continuously, the switch is in recovery mode.
To recover from a failed FLASH upgrade:
1. Visit
http://www.avocent.com/support
from Avocent.
2. Save the FLASH upgrade file to the appropriate directory on the TFTP server.
3. Set up the TFTP server with the server IP address 10.0.0.3.
4. Rename the download file to DSR8035.fl and place it into the TFTP root directory of the
TFTP server.
5. If the DSR switch is not on, turn it on now.
6. The recovery process should start automatically.
or and pressing
y yes
and download the latest FLASH firmware
.
Enter