Adjusting The View - Avocent DSR2035 Guide D'installation Et D'utilisation

64
DSR2035/8035 Switch Installer/User Guide

Adjusting the view

Using menus or Task buttons in the Video Viewer window, you can do the following:
• Align the mouse cursors.
• Refresh the screen.
• Enable or disable Full Screen mode. When Full Screen mode is enabled, the image adjusts to
fit the desktop up to a size of 1024 x 768. If the desktop has a higher resolution, the
following occurs:
• The full-screen image is centered in the desktop, and the areas surrounding the Video
Viewer window are black.
• The menu and toolbar are locked so that they are visible at all times.
• Enable automatic, full or manual scaling of the session image:
•
•
•
• Change the color depth of the session image.
To align the mouse cursors:
Click the Align Local Cursor button in the Video Viewer window toolbar. The local cursor should
align with the cursor on the remote device.
NOTE: If cursors drift out of alignment, turn off mouse acceleration in the attached device.
To refresh the screen:
Click the Refresh Image button in the Video Viewer window.
-or-
Select View - Refresh from the Video Viewer window menu.
The digitized video image is completely regenerated.
With full scaling, the desktop window remains fixed and the device image scales to fit
the window.
With automatic scaling, the desktop window is sized to match the resolution of the
server being viewed.
With manual scaling, a drop-down menu of supported image scaling resolutions
is displayed.