Managing Device Properties; Table 4.2: Viewing Appliance Information - Avocent DSR2035 Guide D'installation Et D'utilisation

4. Select the preemption and access levels for the new user.
5. Click the Save button to complete the process.
To delete a user account (Administrator only):
1. On the side menu bar, select Local Accounts. The current user list will be displayed.
2. Click the box to the left of each account that you wish to delete, then click the
delete button.
To edit a user account (Administrator or active user only):
1. On the side menu bar, select local accounts. The current user list will be displayed.
2. Click the name of the user you wish to edit. A user profile will appear.
3. Edit the user account as needed, then click Save.

Managing device properties

Viewing and changing appliance configuration information
The DSR2035/8035 switch can report most device properties directly through the DSR
web browser.
NOTE: Users can view all appliance information, but only Administrators can change settings.

Table 4.2: Viewing Appliance Information

To do this:
Display the unit's name or type
Display a list of available target devices, their
type and status
Enter, change or display the unit's network
address, gateway address, subnet mask, MAC
address, LAN speed, DHCP enable status or
ICMP ping reply status
Display the unit's current firmware revision for
application, boot and Video FPGA
Display a list of the attached IQ module and
its status
Display a list of active KVM sessions and
their duration
Display a list of devices attached to the
DSR2035/8035 switch
Chapter 4: Web Server Operations
Select this:
Appliance - Overview
Target Devices
Appliance - Appliance Settings - Network
Appliance - Appliance Settings - Versions
Appliance - Appliance Settings - Ports - IQ modules
Appliance - Appliance Settings - Sessions - Active
Appliance - Appliance Settings - Sessions - Active
55