Managing Device Properties - Avocent DSR 1024 Guide D'installation Et D'utilisation

Managing Device Properties

Viewing and changing appliance configuration information
The DSR1024 switch can report most device properties directly through the DSR web browser.
NOTE: Users can view all appliance information, but only Administrators can change settings.
Table 3.2: Viewing Appliance Information
To do this:
Display the unit's name or type
Display a list of available target devices, their
type and status
Enter, change or display the unit's network
address, gateway address, subnet mask, MAC
address, LAN speed, DHCP enable status or
ICMP ping reply status
Display the unit's current firmware revision for
application, boot and Video FPGA
Display a list of the attached IQ module and
its status
Display a list of active KVM sessions and
their duration
Display a list of devices attached to the
DSR1024 switch
Display a list of devices attached to the
DSR1024 switch
View the unit's part number, serial number and
EID number
Enter or display the unit's Site, Department and
Location
Enable the inactivity timeout
Change the unit encryption level
Change the modem time-out settings
All manuals and user guides at all-guides.com
Chapter 3: Web Server Operations
Select this:
Appliance - Overview
Target Devices
Appliance - Appliance Settings - Network
Appliance - Appliance Settings - Versions
Appliance - Appliance Settings - Ports - IQ modules
Appliance - Appliance Settings - Sessions - Active
Appliance - Appliance Settings - Sessions - Active
Appliance - Connections
Appliance - Properties - Identity
Appliance - Properties - Location
Appliance - Appliance Settings - Sessions - KVM settings.
Then, click the Enable Inactivity timeout box
Appliance - Appliance Settings - Sessions - KVM settings -
Then select the level of encryption desired for keyboard/
mouse signals and then video signals
Appliance - Appliance Settings - Ports - Modem
27