Managing Server Tasks Using The Oscar Interface; Figure 3.14: Oscar Interface Keyboard Dialog Box - Avocent AutoView 3100 Mode D'emploi

30
AutoView 3100/3200 Switch Installer/User Guide
See Appendix E for information on emulating certain Sun keys using a PS/2 keyboard and special
considerations for Japanese and Korean Sun USB keyboards.
NOTE: Only local users can view or change keyboard country code settings.
To set the keyboard country code for Sun servers:
1. If the OSCAR interface is not open, press
2. Click Setup - Keyboard to open the Keyboard dialog box.

Figure 3.14: OSCAR Interface Keyboard Dialog Box

3. Select a country code and click OK to save your settings.
4. Reboot the Sun servers. After rebooting, each Sun server will request the country code setting
stored in the AVRIQ module.
NOTE: If you wish to reboot the target devices by power-cycling them, you must wait 90 seconds before
rebooting. A soft reboot may be performed without waiting 90 seconds.

Managing server tasks using the OSCAR interface

From the OSCAR interface Commands dialog box, you can manage your AutoView 3100/3200
switching system and user connections, enable the Scan and Broadcast modes and update
your firmware.
All manuals and user guides at all-guides.com
to open the Main dialog box.
Print Screen