Feedback Menu; Backlight Menu; Wheel Circumference Menu - Flyer MOUNTAIN Série Notice Originale

Press the "OK" button to save the setting . Select
the sub-menu "Confirm" and press the "OK" but-
ton again to activate the setting .

5.5.9 Feedback menu

In the feedback menu, you can configure the vi-
bration feedback of the remote . The following set-
tings can be selected:
Selection Description
Off No vibration feedback
On
Every button press and every
active error message gener-
ates vibration feedback
Errors only Vibration feedback is only
generated by active error
messages
The check mark indicates which fee back setting
is currently applied . Press the joystick to apply the
new settings after confirmation (see 5.3).

5.5.10 Backlight menu

In the backlight menu, you can adjust the display
backlighting in the range from 10 to 100% .
Press the joystick to apply the new settings after
confirmation.
5.5.11 Wheel circumference menu
In the wheel circumference menu, the wheel cir-
cumference used to calculate the speed can be
adjusted . You can adjust the wheel circumference
of your FLYER e-bike by ±5% .
12