Factory Settings - Raleigh PEDELEC IMPULSE EVO Notice Originale

6.4.3.21

Factory settings

Path: Settings | Device settings | Other | Factory settings
1. Navigate to "Factory settings" as described in
settings in the main menu Page
2. The following question appears on the display: "Reset factory
settings?" with "Yes" and "No" underneath.
3. Select the required option using the / buttons. The selection is
highlighted.
4. Confirm your selection by briefly pressing the button. You return to
sub-level 2.
6.4.3.22 Impulse Evo (Smart) display: Version
Path: Settings | Device settings | Other | Version
If you want to display the name of the current software version on your
display and motor, proceed as follows:
Display of software version
1. Navigate to "Version" as described in
the main menu Page EN-54. This shows the current display, motor and
Bluetooth chip* software.
2. Pressing the button returns you to sub-level 2.
Ask if there is a software update for your pedelec in the
course of regular maintenance checks listed in the service
book.
EN-68 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
 6.4.1 Configuring
EN-54.
 6.4.1 Configuring settings in
Display of serial number
1. Navigate to "Version" as described in
the main menu Page EN-54.
2. Briefly press the
button. This shows you the serial numbers of the
display and motor.
3. Pressing the
button returns you to sub-level 3.
Test display
It is advisable to access the test display in order to clearly identify pixel
errors.
1. Navigate to "Version" as described in
the main menu Page EN-54.
2. Press the
twice quickly in succession. This shows you a black screen.
3. Pressing the button returns you to sub-level 3.
6.4.3.23 Impulse Evo Smart Compact display: Version
Path: Settings | Device settings | Other | Version
This menu option shows you which software versions are currently on your
display and motor. The serial numbers of the display and motor are also
shown.
1. Navigate to "Version" as described in
the main menu Page EN-54.
2. Pressing the
button returns you to sub-level 2.
 6.4.1 Configuring settings in
 6.4.1 Configuring settings in
 6.4.1 Configuring settings in