Changing Ride Profile; Switching Off The Pedelec - Raleigh PEDELEC IMPULSE EVO Notice Originale

5.9 Changing ride profile
1. While in the start menu, press the
now in the main menu.
2. Select main menu option "Settings" using the / buttons. The option
selected is highlighted.
3. Confirm by briefly pressing the button. You are now in sub-level 1.
4. Select "Device settings" using the / buttons.
5. Confirm with
6. Select "Drive" using the / buttons. The option selected is
highlighted.
7. Confirm by pressing the button. You are now in sub-level 2.
8. Select "Biking profile" using the / buttons. The option selected is
highlighted.
9. Confirm by pressing the button. You access the ride profiles.
Ride Characteristics
profile
Power on
start-up
Relax
Low
Regular
Medium
Dynamic
High
button for three seconds. You are
Power Maximum Power
delivery power consumption
Low Low Low
Medium Medium Medium
High High High
10. Use the / buttons to select the required option.
It is highlighted.
11. Briefly pressing the button returns you to sub-level 2.
5.10 Switching off the pedelec
DANGER
Only ride the pedelec when you can safely reach the brakes
Braking Page EN-22. Your pedelec does not have an Emergency stop
button. You must activate the brakes to stop the cycle quickly in a
dangerous situation. The maximum brake force is greater than the
propulsion force possible. This means stopping is guaranteed at all
times by pressing the brakes. Note that the drive system does not
disable automatically after braking. Switch the drive system to idle
after braking.
On the easy-reach control
1. Press the button on the easy-reach control for one second. The
Impulse Evo system switches off.
Via the battery
1. Briefly press the battery button twice. The Impulse Evo system
switches off after a few seconds.
Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
 3.7
EN-43