Raleigh PEDELEC IMPULSE EVO Notice Originale page 173

6.4.3.16 Climb assist
Path: Settings | Device settings | Drive | Climb assist
The power sensor in the motor registers your pedalling force as you ride.
The motor controller interprets the pedal power signals and responds
(differently depending on the climb assist value setting). The lower the
set value (e.g. 1), the more sluggish the reaction of the motor when assist
is enabled. With a high value (e.g. 7), the motor reacts very responsively
to the pedal force. When riding uphill it can be an advantage if the power
sensor does not react so sensitively, so as to provide the motor assist as
evenly and smoothly as possible.
1. Navigate to "Climb assist" as described in
in the main menu Page EN-54.
You can choose between:
1 2 3
Slow comportment
2. Use the / buttons to select the option required.
The option selected is highlighted.
3. Confirming with returns you to sub-level 2.
EN-66 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
 6.4.1 Configuring settings
4 5 6
Sensitive comportment
6.4.3.17 Ride profile
Profile: Settings | Device settings | Drive | Ride profile
In the ride profile, it is possible to specify the maximum assist level to be
achieved by the motor.
Select the ride profile in line with the routes you ride. For
a leisurely tour with friends at the weekend, the "Relax"
assist level is the right choice. If you often speed from one
appointment to the next, the "Dynamic" setting can inject
the necessary pace.
The most recent setting remains saved.
1.
Navigate to "Ride profile" as described in  6.4.1 Configuring settings
in the main menu Page
7
You can select from the following:
Ride pro- Characteristics
file
Power on
start-up
Relax
Low
Regular
Medium
Dynamic
High
2. Use the / buttons to select the option required.
The option selected is highlighted.
3. Confirming with returns you to sub-level 2.
EN-54.
Power deli- Maximum
very power
Low Low
Medium Medium
High High
Power con-
sumption
Low
Medium
High