Raleigh PEDELEC IMPULSE EVO Notice Originale page 170

6.4.3.10 Impulse Evo Smart Compact display: Time
Path: Settings | Device settings | Display | Time
The time is shown in the start menu. Proceed as follows to set or change
the time:
1. Navigate to "Time" as described in
Configuring settings in the main menu Page
EN-54.
2. Use the / buttons to select the digits
required. The selection is highlighted
white.
3. Confirm by briefly pressing . You move to
the next option.
4. Confirming the seconds with returns you
to sub-level 2.
 6.4.1
Time
0 9 : 5 2 : 0 7
Setting the time
6.4.3.11 Impulse Evo (Smart) display: Parking light
Path: Settings | Device settings | Display | Parking light
From this menu, you can set how long the parking light of the pedelec
stays on after the system switches off.
1. Navigate to "Parking light" as described in
settings in the main menu Page
You can choose between:
OFF 15 secs. 30 secs.
2. Use the / buttons to select the desired option. The selection is
highlighted.
3. Confirm by briefly pressing . You return to sub-level 1.
Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
 6.4.1 Configuring
EN-54.
45 secs 60 secs
EN-63