Raleigh PEDELEC IMPULSE EVO Notice Originale page 145

4. Remove the battery key from the lock.
The battery is now locked.
Seat tube battery: Impulse Evo Next pedelec
1. Hold the battery, with the discharger
connector pointing downwards, at an
angle of 80˚, slightly tilted to the left
in front of the docking station.
2. Place the battery catches into the
dents provided.
EN-38 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
For 4. Locking the battery
For 1. Hold in front of the docking station
Battery nibs
Recesses
For 2. Battery nibs into recesses
3. Push the battery forwards and
upwards into the docking station until
the locking mechanism engages.
4. Turn the battery key clockwise. The
battery is now locked.
IMPORTANT
The recommendation is to remove the key now and keep it in a safe
place so it does not break off and is not lost.
Make a note of the key number on the sales receipt or proof
of purchase. You can order a replacement with this number
if you lose the key
For 3. Push battery into docking station
For 4. Locking the battery
 11.2 Battery Page EN-100.