Raleigh PEDELEC IMPULSE EVO Notice Originale page 204

Description
Some of the display is missing.
Display lighting not working.
The display is misted up.
Smartphone cannot connect to Impulse
Evo / Impulse Evo Next Smart display.
Motor assist level is too weak.
Motor idles.
Cause
The display is faulty.
The display is faulty.
Moisture has got in.
a) The requirements for connecting
your smartphone to the Impulse
Evo / Impulse Evo Next Smart
display are not satisfied.
b) The pedelec software is not up
to date.
c) The distance from the
smartphone to the display is too
long.
d) The Bluetooth module of the
display is faulty.
e) The Impulse E-Bike navigation
app is not up to date.
f) The smartphone has "crashed".
g) The Bluetooth function on your
smartphone is disabled.
a) Climb assist is set too low.
b) Battery is flat.
c) U nsuitable ride profile.
a) Gear changing is not properly
set.
Remedy
Enable the test display  6.4.3.22 Impulse Evo (Smart) display: Version Page
replaced. Please contact your cycle dealer.
Please contact your cycle dealer. The display may have to be replaced.
Dry out the pedelec complete with display at room temperature (19 - 21°C). If the display is still misted up,
contact your cycle dealer. The display may have to be replaced.
a) Check the technical requirements of your smartphone
b) Contact your cycle dealer for a software update.
c) Shorten the distance from the smartphone to the display (to a maximum of 3 metres).
d) Contact your cycle dealer.
e) Download the latest version of the Impulse E-Bike navigation app
f) Switch off the smartphone (remove and reinsert its battery if necessary) and restart it.
g) Enable the Bluetooth function on your smartphone.
a) Change the value  6.4.3.16 Climb assist Page
b) Install new/charged battery  10.3.1 Charging a battery Page
c) C hange the ride profile  6.4.3.17 Ride profile Page
a) Check the gears. Contact your cycle dealer.
Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
EN-68. The display may have to be
 7.1 Technical requirements Page
 7.3 Installation Page
EN-66.
EN-93.
EN-66.
EN-72.
EN-74.
EN-97